Martin’s Heating & Air, Inc. Service Membership

Service Membership Plans/Options

Premium PLAN

$160.00 One Unit / additional unit $80.00 each

Furnace Tune-up

 

  • Test Capacitors
  • Inspect Ducts or obvious defects
  • Clean blower wheel
  • Record blower motor amp draw lubricate if applicable
  • Replace filter ( customer provided at visit)
  • Check thermostat and calibrate if possible
  • Inspect gas and flue connections
  • Check high limit
  • Clean burners
  • Inspect heat exchanger for cracks or sooting
  • Check and set gas pressure
  • Check all electrical connections
  • Test all safeties
  • Check electrical heating elements and circuits
  • Check refrigerant pressures
  • Check reversing valve
  • Inspect all IAQ products
  • Check electrical connections in outdoor unit ( Heat pump)
  • Record compressor motor AMP draw (Heat pump)
  • Record condenser motor AMP draw ( Heat pump)
  • Inspect cooling coils (where readily accessible Heat pump)

A/C – Heat pump Tune-Up

  • Test capacitors
  • Check electrical connections in outdoor unit
  • Inspect all IAQ produces
  • Check reversing valve
  • Check refrigerant pressures subcooling and superheat
  • Compare to factory setting
  • Test all safeties in UOT door unit
  • Replace filter (customer supplied at time of visit)
  • Record blower motor AMP draw lubricate if applicable
  • Record compressor motor AMP draw
  • Record condenser motor AMP draw
  • Thoroughly wash condenser coil

Premium PLUS

$240.00 Per Unit

Furnace Tune-up

  • Test Capacitors
  • Inspect Ducts or obvious defects
  • Clean blower wheel
  • Record blower motor amp draw lubricate if applicable
  • Replace filter ( customer provided at visit)
  • Check thermostat and calibrate if possible
  • Inspect gas and flue connections
  • Check high limit
  • Clean burners
  • Inspect heat exchanger for cracks or sooting
  • Check and set gas pressure
  • Check all electrical connections
  • Test all safeties
  • Check electrical heating elements and circuits
  • Check refrigerant pressures
  • Check reversing valve
  • Inspect all IAQ products
  • Check electrical connections in outdoor unit ( Heat pump)
  • Record compressor motor AMP draw (Heat pump)
  • Record condenser motor AMP draw ( Heat pump)
  • Inspect cooling coils (where readily accessible Heat pump

Includes a complete Evaluation of your system performance with a printed report detailing your system total capacity gathered by the I-Manifold

Example:

  • United Rated 36,000 BTU
  • Unit Preforming 32,000 BTU

A/C – Heat pump Tune-Up

  • Test capacitors
  • Check electrical connections in outdoor unit
  • Inspect all IAQ produces
  • Check reversing valve
  • Check refrigerant pressures sub cooling and super heat
  • Compare to factory setting
  • Test all safeties in UCT door unit
  • Replace filter ( customer supplied at time of visit)

Contact Us today for more information on Martin’s Heating & Air, Inc. Service Membership